TYLER, TEXAS · TEXAS PE NO. 91695 · FIRM REGISTRATION F-16085 903.707.0777  ·  info@bickley-engineers.com
Bickley Consulting Engineers Contact Us
INDEPENDENT ENGINEERING · TYLER, TEXAS

When HSE stops the job, somebody has to say what it would take to run it safely again.

A pressure test bay. A lift and its rigging, for a load or for a person.

Bickley Consulting Engineers (BCE) is the practice of Terry Bickley, PE.
30+ years on closed, pressurized and rotating systems. He works for the company that owns the job, not for anyone selling into it: he reviews what is set up, writes what the fix has to do, checks what the vendors claim, and stays until your own people can run it and HSE has signed it off.

Tell Terry What Is StoppedTyler, Texas ·  Licensed Professional Engineer
Blast Containment Lifting and Rigging Weld and Code Noise and Vibration
Licensed Professional Engineer, Texas No. 91695Firm Registration F-16085Design for Six Sigma Black BeltBS, Mechanical EngineeringNamed inventor on 6 granted US patents
SERVICES

Which One Is Your Problem Today?

Blast Containment. Lifting and Rigging. Weld and Code. Noise and Vibration.

FOR THE HSE MANAGER

You stopped it because nobody could show you it was safe. Restarting it is the harder question.

A stop is defensible. A restart needs somebody to write down what "safe enough" means for that bay and that tool, and the engineering opinion on offer may come from the company that wants to sell you the fix.

Terry is the independent engineer on your side. The first thing he does is a review of how the facility is run and what it is set up to test, against the codes and your own requirements, with a written report your whole team reads together: what is good, where the misses are, and a plan for closing them. It is not a sealed calculation. It is the first independent answer to the restart question, with his name on it.

It does not matter whether it is a test bay or a lift. If you are the one who stops it, he is the engineer who helps you say what it would take to start it again.

On blast containment he sells judgment, never hardware.

BLAST CONTAINMENT ENGINEERING

The Owner's Engineer. Think of It the Way You Think About a Lawyer.

You would not let the other side's attorney draft your contract. They may be perfectly honest. They are not working for you.

In containment it is easy to end up there. The company that sells you the barrier can also be the one that runs the calculation that says the barrier is adequate.

Terry is hired by the company that owns the facility, to represent that company's interests against everyone selling into it. He reviews the facility, writes what the fix has to do, checks what each supplier claims it does, and stays through installation, the HAZOP (a structured review of everything that could go wrong and what prevents it) and the sign-off.

He does not sell the hardware.

OWNER'S SIDESELLING INTO IT Facility Owner HSE · ENGINEERING · TEST BCE OWNER'S ENGINEER Barrier Vendors Controls Company Contractors and Trades CHECKS EVERY CLAIM. SELLS NOTHING.
HOW IT GOES

Five Stages. From the Stop to the Sign-Off.

Start with stage 1. Every stage ends with something your team can read, check and keep.

01

The Operations and Hazards Review

Can the enclosure hold what you test? Do the piping and system meet the ASME codes that apply? Are the controls safety-interlocked? Does it meet your own requirements?

YOU GET: a written report, reviewed with your whole team
02

The Engineering Evaluation

Will the facility withstand the blast you want it to contain? He gathers the original records, from the steel's material test reports to the weld records, and finds the gaps.

YOU GET: will or will not meet your requirements
03

Specifications and Budgetary Quotes

Two specifications, one for the controls and interlocks and one for the mechanical upgrades. He finds and vets suppliers and checks the quotes and the engineering behind them.

YOU GET: what a reasonable number looks like
04

The Engineering Package and Hard Quotes

The controls design, the parts and details, the bill of materials, who buys what, the trades coordinated, and a design far enough along for a firm price.

YOU GET: one hard quote covering everything
05

Installation, HAZOP, Sign-Off and Training

He verifies the installation. The HAZOP becomes the final test, witnessed by your HSE team. Procedures are written, operators trained, and the facility is signed back on.

YOU GET: the bay running again, signed off

The smallest useful thing is the review. Stage 1. You keep the report either way, and you know the next step before anyone quotes you a fix.

Ask for a Facility Review
LIFTING AND RIGGING ENGINEERING

When a Catalog Spreader Bar Will Not Do It.

Some lifts do not have a product. The load is too heavy, the geometry is wrong, the pick points are in the wrong place, or the thing being lifted is the only one that will ever exist. Some lifts carry a person. Either way, the rigging needs somebody to be accountable for it. Not just a drawing.

Talk Through Your Lift

Rigging for a Load

Custom below-the-hook devices: the bars, beams and frames that hang from a crane hook and carry the load.

Design to code, with analysis, drawings and calculations
Design basis ASME BTH-1, with ASME B30.20 for marking, inspection and use
Fabrication and welding oversight to AWS code
Proof load testing supervision, load rating and marking

Working at Height

When a person is the load, or a crew has to tie off, there is no room for a guess. Fall protection anchor points, and personnel platforms hung from a crane or hoist.

Anchor points evaluated to OSHA 29 CFR 1926.502(d)(15) and 1910.140(c)(13): 5,000 pounds per worker, or a qualified design
Checked against the site's own requirements beyond OSHA
A sealed report before anyone ties off or steps in
ONE ENGINEER ACROSS THE WHOLE CHAIN
01The RequirementWhat it lifts, how, and where
02Design to CodeAnalysis, drawings and calculations
03FabricationWeld and fabricator oversight
04Proof TestLoad tested, rated and marked
05PaperworkFiled by your safety department
Terry Bickley, PE
CREDENTIALS
Licensed Professional Engineer, Texas No. 91695 Firm Registration F-16085 Named inventor on 6 granted US patents Design for Six Sigma Black Belt BS, Mechanical Engineering
ABOUT TERRY BICKLEY, PE

The Engineer Who Advises You Is the One Who Did the Work.

Terry Bickley started on the shop floor, rebuilding the machine tools that made compressor parts. Over more than 30 years he moved through product design, acoustics, lead engineer on upgrades to a global test laboratory, and oilfield technology development. Each step added a layer: how a part is made, how it is designed, how it fails, and how to prove it will not.

That is why he can stand in a test bay, under a lift, or beside a noisy machine and tell you what is actually wrong. He is the engineer on the work, he works alongside your engineers on larger programs, and he stays with the project from the first review to the sign-off.

30+Years on pressurized, rotating and lifting equipment
2004Licensed Professional Engineer in Texas since
6Granted US patents naming him as inventor
1Global test lab upgraded as lead engineer, its reverb room qualified to AHRI standards

The Unusual Part Is the Order He Learned It In.

1990 TO 1999Compressor ManufacturingRebuilt CNC machine tools to precision tolerances. Senior manufacturing engineer, compressor machining.
1999 TO 2004Product DesignCompressors, plus commercial and residential HVAC, including a new product launch team.
2004 TO 2009AcousticsThe only acoustics engineer for the company for 4.5 years.
2009 TO 2013Global Lab UpgradesLead engineer on upgrades to the global residential noise and vibration lab: design, fabrication oversight, installation, and qualifying the reverb room to AHRI standards. Led noise and vibration on a global variable-speed AC and heat pump launch.
2014 TO 2025Oilfield TechnologyMechanical and acoustics engineering in technology development, Houston. Named inventor on 6 granted US patents.
TODAYBickley Consulting EngineersThe owner's engineer, from the first review to the sign-off. Tyler, Texas.
CONTACT US

Tell Terry What Is Stopped.

A test bay, a lift, a weld, or a machine nobody can explain. Describe the problem and you will get a straight answer about whether he should take it.

HOW IT WORKS
01A call. A straight answer on whether this is work he should do, someone else should do, or does not need doing.
02A scope and a price. A named deliverable, a price or agreed basis, the timing, and terms.
03A document you can rely on. From the licensed engineer who did the work.
What helps on a first call about a test bay: what you test, the test medium, the pressure, temperature, and volume, what the bay was originally set up for, and what changed.

Terry reads what you send and tells you whether the work fits. If it does not, he will say so.

Bickley Consulting Engineers, Engineering Solutions for Tomorrow
Headquarters: Tyler, Texas903.707.0777 ·  info@bickley-engineers.com
TEXAS PE NO. 91695 FIRM REGISTRATION F-16085 © 2026 BICKLEY CONSULTING ENGINEERS